Standard Quick Release Couplers
Standard Quick Release Couplers
8010 SERIES UNIVERSAL MALE TIP

The standard male tip widely used in the agricultural industry, developed and proven through over 40 years of farm service.

  • Has rugged, reliable ball valve and induction-hardened locking ball groove to prevent brinelling and prolong life.
  • Shielded valve plus valve stop eliminates flow checking when used with connect-under-pressure type female bodies.
  • Tapered hex design makes identification easy after years of use.

Part no. BP8010-29

½" BSP Thread

Std "BALL" type

Part no. BP8010-4

½" NPT Thread
(NOTE: USA Type 1/2" NPT Thread)
Std "BALL" type

Also Avail.

Part no. BP8010-29P

Poppet (pin type) ½" BSP thread

MALE TIP STANDARDIZATION
8010 Series male tips meet ASAE #S366, SAE # J1036, and I.S.O. #5675 standard requirements.
These engineering societies have established the following specifications for agricultural male tips
:
  • Physical Dimensions. Critical dimensions are to be specified :
    • 1) from the nose of the tip to the locking ball groove,
    • 2) from the locking ball groove to the shoulder where the hex begins,
    • 3) diameter of the nose portion, and
    • 4) valve location in both open and closed position.
  • Valve Spring Force. The force required to push the valve to the flush position is not to exceed 10 lbs.
  • Maximum Pressure Drop. The pressure drop at a flow of 16 GPM is not to exceed 25 PSI.
  • Rated Working and Burst Pressure. The rated working pressure must be a minimum of 3000 PSI. The burst pressure must be a minimum of 10,800 PSI.

All standards are established around male tips .

Female bodies should be designed to accept an industry standard male tip. All female bodies having ½" body size designed for agricultural use will accept such a standard male tip.


QUICK RELEASE COUPLERS - NOT 1/2"

FEMALE QUICK RELEASE COUPLER
PART NUMBER
THREAD
SIZE
COUPLER
SIZE
ACROSS
FLATS
BP4050-2
¼" NPFT
¼"
¾"
BP4050-3
3/8" NPFT
3/8"
1 5/16"
BP4050-5
¾" NPFT
½"
1 1/8"
BP4150-5
¾" NPFT
¾"
1 3/8"
BP4050-6P
1" NPFT
1"
1 5/8"
BP4050-15
¾ x 16 O-Ring
½"
1 1/16"
BP4050-16
7/8" x 14 O-Ring
½"
1 1/16"
MALE TIP
PART NUMBER
THREAD
SIZE
COUPLER
SIZE
HEX
SIZE
BP4010-2
¼" NPFT
¼"
¾"
BP4010-3
3/8" NPFT
3/8"
1 5/16"
BP8010-5
¾" NPFT
½"
1¼"
BP4110-5
¾" NPFT
¾"
1¼"
BP4010-6P
1" NPFT
1"
1 5/8"
BP8010-15
¾ x 16 O-Ring
½"
1 1/16"
BP8010-16
7/8" x 14 O-Ring
½"
1 1/16"

1/2" QUICK RELEASE COUPLERS
GENUINE FEMALE COUPLERS
½" I.S.O./A.S.A.E. STANDARD
BP4050-4
  • Universal general purpose coupling
  • single acting sleeve
  • cannot connect under pressure
  • Universal design replaces NPT/BSP applications
BP4250-4
  • double acting sleeve for one hand operation
  • cannot connect under pressure
  • ½" N.P.T. thread to suit original tractor pipework
BP8250-4C
  • double acting sleeve for one hand operation
  • connects with either or both sides under pressure
    (it is recommended to use BP8010-29 ball tip with this coupler)
  • ½" N.P.T. thread to suit original tractor pipework
BP9250-4L (YELLOW)
BP9250-4R (RED)
  • positive lever action can lock both valves open to overcome flow variations
  • closed position positively isolates the coupling
  • ½" N.P.T. thread to suit original tractor pipework
B17
DOUBLE ACTING COUPLER KIT

Contains:

Standard Quick Release Couplers